2 Pack Air Tank Manifold with Fill Port, Aluminum Knob,Safety Valve and Relief B

The air tank end is 1/2″ MNPT. The gauge port is 1/8″ FNPT. The hose (outlet) port is 1/4″ FNPT. Turn the round On/Off Wheel (Knob) counter-clockwise to the open position. This allows air to flow from the Air Tank through the Air Hose.Turn the round On/off Wheel(Knob) to OFF.This will close the valve between the tank and hose and keep air from leaking.

1″ 110V 120V-220VAC Stainless Steel Motorized Electric Ball Valve N/C US Plug

◎Actuator Installed With U.S. 3 Pin Plug, 1 Meters Length of Electrical Cable; ◎2 Way 1″ NPT Full Bore 25mm(0.99in) Stainless Steel Lead Free Valve Body, Suitable For Portable Water; ◎Wide Range Working Voltage Design, Will Working At Voltage From 110-240Volt AC, Including 115V/120V/220V/240VAC; ◎Limit Switches Built-In, Auto Cut Off Current When Arrived At Place(0Ma When Fully Open or Fully Closed),Saving And Long Life; ◎Only Connecting 2 Wires(Red/Black) To The Power Supply Then The Valve Can Be Opened, Normally Closed Design(Built-In Capacitor Return), Will Return To Original Position When Power Off/Power Failed; Product Overview: ◎ Dimension:1 Inch DN25; ◎ Maxmum Working Pressure: 150PSI; ◎ Medium: Water(Include Portable Water), Gas, Oil; ◎ Voltage: 110-230Volt AC Both 50 and 60Hz; ◎ Working Current: Max 0.5Amps When Open; ◎ Cable Length: 1 Meters; ◎ Medium Temperature:-5° ~ 100°C; ◎ Manual Override:No; ◎ Indicator:Yes; ◎ Open and Closed Time:≤5sec; ◎ Wiring: CR2-02. Package Include: 1* Full Set of 1″ Stainless Steel Ball Valve Application: ◎HVAC; ◎Water Treatment; ◎Chemical Process; ◎Small Industrial Equipment For Automatic Control; ◎Replacing Solenoid Valve, Particularly When Solenoid Cannot Work Reliably; ◎Automatic Control Systems; ◎Efficient Water-Saving, Water Equipment; ◎Solar Hot Water Project; ◎Regular Watering The Flowers, Timing Humidifying, Timing of Drainage of Air Compressor. Features: ◎Smart Shape, Perform Reliably, Large Output Torque, As Long As 50000-100000 Times , Convenience For All Kinds Of Requirements; ◎Float Ball design, No Leak, Large Flow, The Valve is Bi-directional Ball Valve , Regardless of Inlet And Outlet , Most Suitable for Heavy Dirt and Long Time No Action; ◎The Conditions That Solenoid Valve Can Not Be Worked; ◎High Protection Class, Can Be Worked In Most Conditions; ◎POM Cooperate With Metal Gear, The POM Gear is Used in High-Speed Level to Reduce Noise, At The Same Time Metal Gear is Applied At The Low-Grade To Ensure The Reliability of The Gear; ◎Electrical and Mechanical Limit Integrated Design, Accurate Localization ,High consistency , Put an End to Swing of Valve.